 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MEDICAL & MILITARY PMP110 Series 1 1 0 W AT T S M U LT I P L E O U T P U T A C / D C M E D I C A L Features * In compliance with EN61000-3-2, EN61000-3-3 and EN61000-1-1-2. * Thermal protection. * Overvoltage protection. * Overcurrent protection. * 100% burn-in at full rated load. Specifications INPUT Input Voltage Frequency Input Current Leakage current Insulation 90-132/180-264Vac 47Hz-67Hz 3.2A (rms) for 115Vac. 1.8A (rms) for 230Vac. 90A max. @ 115Vac. 60Hz. 150A max. @ 230Vac. 50Hz. Input - Output: 4000VAC Input - Ground: 1500VAC Output - Ground: 500VAC 15A @ 115V, 30A @ 230V OPERATING MTBF Efficiency 550,000 hrs @ 25C 65-70% minimum. ENVIRONMENTAL Operating Temperature Derating Storage Temperature Relative Humidity 0C to 70C Derate to 50% at 70C -40C to 85C 5%-95% non-condensing STANDARDS AND APPROVALS Safety standards C-Tick UL2601-1, CSA C22.2, TUV EN60601-1 AS/NZS CISPR11 Group 1, Class A EN60601-1-2: 2001,EN61000-3-2, -3, EN61000-4-2, -3, -4, -5, -6, -8, -11 EN55011 Class B, FCC Class B, VCCI Class B TBC Inrush Current OUTPUT Output Voltage Output Current Ripple & Noise Line Regulation Load Regulation Transient Response Overvoltage Protection Overcurrent Protection Temperature Coefficient Holdup Time PFD Signal (Optional) See table See table 1% peak to peak 0.2% maximum at full load. See table Max. deviation 4% recovering to 1% within 500s after 25% load charge Provided on V1 only. Set at 110%-132% of nominal. All outputs protected for short circuit conditions All outputs 0.04% per C. Typically 12ms at 110VAC. Power fail detection signal. TTL logic low upon loss of input power. EMC standards EMI standards MEPS compliance MECHANICAL Dimensions Weight 254x127x68.58mm 1.4kgs approx. Your dependable power partner - www.powerbox.com.au 365 MEDICAL & MILITARY PMP110 Series 1 1 0 W AT T S M U LT I P L E O U T P U T A C / D C M E D I C A L Selection Table MAX. MODEL NUMBER OUTPUT #1 VNOM IMIN IMAX OUTPUT #2 OUTPUT #3 OUTPUT #4 OUTPUT POWER TOL VNOM IMIN IMAX IPEAK TOL VNOM IMIN IMAX TOL VNOM IMIN IMAX TOL PMP110-23 PMP110-31 PMP110-32 PMP110-40 PMP110-41 PMP110-42 PMP110-45 PMP110-45-1 PMP110-45-2 +5V +5V +5V +5V +5V +5V +5V +5V +5V 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 0.8A 2A 0.8A 10A 10A 10A 10A 10A 10A 10A 10A 10A 5% 5% 5% 5% 5% 5% 5% 5% 5% +12V +12V +15V +12V +15V +12V +12V +12V +24V 0A 0A 0A 0A 0A 0A 0A 0A 0A 5A 5A 4A 5A 4A 5A 5A 5A 3A 9.0A 9.0A 7.5A 9.0A 7.5A 9.0A 9.0A 9.0A 5.0A 5% 5% 5% 5% 5% 5% 5% 5% 5% -12V -15V -12V -15V -12V -12V -12V -12V (N/A) 0A 0A 0A 0A 0A 0A 0A 0A 2A 2A 2A 2A 2A 2A 2A 2A 5% 5% 5% 5% 5% 5% 5% 5% -5V +24V +12V +24V +24V +12V (N/A) (N/A) (N/A) 0A 0A 0A 0A 1.5A 0A 2A 2A 2A 2A 3A 2A 5% 5% 5% 5% 10% 5% 5% 110W 110W 110W 110W 110W 110W 110W 110W 110W 110W PMP110-46 +5V 0.8A 10A 5% +15V 0A 4A 7.5A 5% -15V 0A 2A 5% -5V 0A 2A NOTES: (1) Peak output current with 10% maximum duty cycle for less than 60 seconds. Total peak power must not exceed 130 watts. (2) The output 1 of model PMP110-45-1 needs a minimum current of 2A to support the other outputs at their maximum rated loads. Pin Chart MODEL/PIN PMP110-23 PMP110-31 PMP130-40 PMP130-41 PMP130-45 PMP130-32 PMP130-45-1 PMP130-45-2 PMP130-46 1 Common Return Common Return Common Return 2 N.C. Output 3 3 Output 1 Output 1 4 N.C. N.C. 5 Output 2 Output 2 6 Common Return Common Return Common Return 7 Output 1 Output 1 8 N.C. or PFD N.C. or PFD Output 3 Output 1 Output 4 Output 2 Output 1 N.C. or PFD Technical Illustration 366 |
Price & Availability of PMP110
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |